닫기
Infraware Technology
FAMILY SITE
fm-takeone-4567

Takeone® Aseptic Sampling System 

Quick, Accurate, Reliable and Safe

Aseptic sampling devices are a critical component in an effective microbial control program. Samples collected with Takeone® are used to measure critical purity attributes such as bioburden, sterility and endotoxin levels and important process parameters like metabolites, nutrients, osmolality, pH and more. The Takeone® aseptic sampling device is a pre-assembled and single-use sampling solution. The 25mm, 1.5″ or 2″ device has 3, 5 or 9 fully-closed and independent sampling lines. Takeone® collects perfectly representative samples giving exact results with no risk of false positives.

  • Closed and Aseptic Sampling
  • Perfectly Representative Samples
  • Pre-assembled and Ready-to-use
  • On Demand Sample Collection
  • Operator-friendly Ergonomic Design
  • Fully Single-use and Disposable
Your Individual TakeOne® Aseptic Sampling
System

Reduce Waste and Eliminate False Positives

Each fluid pathway is fully closed and aseptic from the process vessel to sample container so there is no risk of false positives or ambiguous results. The spring return actuator helps operators to reduce product waste or burst sampling lines from over sampling.

Point of Use Configuration

Some sampling plans are unscripted or highly variable. Takeone® sampling lines are available with weldable TPE tubings such as C-Flex®* or with aseptic connectors allowing for point of use configuration. Weld on or aseptically connect a collection vessel at the point of use for highest degree of flexibility and adaptability.

*C-Flex® is a registered trademark of Saint-Gobain Performance Plastics Corporation.

Patented Technology for Aseptic Sample Collection

Patented technology isolates each sampling line and ensures the fluid pathway and vessel the device remain aseptically sealed even after dozens of actuations.

Cross-Section of Takeone®, Before and After Actuation

Cross-Section of Takeone®, During Actuation

Built and Validated for Reliable Performance

Takeone® Validation Summary

Irradiation | Sterilization Validation Gamma, 25kGy to 35kGy, per ISO11137-2
Assembly | Manufacturing Space ISO 7
Biocompatibility Passes USP Class VI
Bacterial Endotoxin Passes USP 85 (<0.125 EU/mL)
Particulate Test Particulate Test    Passes USP 788 
(≤ 3 particles/ml >25μm; ≤ 10 particles/mL >10μm)

100% Leak Tested

We take seriously the trust you put in us to deliver a high-performing device for critical operations. Every sampling line on every Takeone® is leak-tested before release.

Soft Parts Life Cycle

Soft Parts, also known as reusable parts, are components used on multiple batches in a production process. Reuseable parts present a risk of bioburden contamination which can be due to improper cleaning, improper assembly, damaged or worn parts and other reasons.

Regulatory Agencies demand a risk assessment on all equipment including validation of the number of uses, number of cleaning | sanitization cycles and a program to monitor and control the life cycle of equipment before replacement.

Security in Simplicity

The Takeone® is the first Pre-Assembled Aseptic Sampling device and is fully single-use. The inherent simplicity of the Takeone® removes risks of other sampling systems with complex life-cycles. Production processes with Takeone® are clean, simple and robust.

The pre-assembled and single-use Takeone® eliminates risk, reduces costs and saves time. Takeone® is the preferred aseptic sampling device for an effective microbial control and monitoring program.

How to sample with Takeone®

Step 1 – Recieve

Step 2 – Install

Step 3 – Sample 

Step 4 – Disconnect

Step 5 – Remove

Step 6 – Safety Dispose

It´s About Time

No Assembly, No Disassembly

Avoid risk of repetitive-use hand injury and protect operators from handling sharp.

Robust Materials of Construction

Thoughtfully selected materials ensure the device meets the most rigorous of process conditions.

Tank Mount 316L Stainless Steel, electropolished, 15rA or better
Cannula | Needle 316L Stainless Steel, electropolished, 15rA or better
Takeone® Body High temperature glass reinforced polyester

Performance Specifications

Autoclave Yes, 122°C for 30min (configuration dependent)
Max Steam-in-Place Sterilization 60 min at 30psig|2bar|134.5°C, up to 10 times after actuation
Min/Max Temperature  -55°C/300°C (configuration dependent)
Operating Temperature Range  -20°C to 50°C (configuration dependent)
Burst Pressure (Takeone Mount) 8.9 bar (129psi)
Maximum Operating Pressure (Takeone Mount) 3.1 bar (45psi)
Maximum Operating Pressure, during sampling 2 bar (29psi) at 25°C | do not overfill or pressurize collection vessels
Maximum Number of Actuations 40

Copyright © 2020. Satorius. All rights reserved.
싸토리우스코리아 웹사이트는 귀하의 사용자 경험을 개선하고 귀하의 관심사에 맞는 콘텐츠를 제공하기 위해 쿠키를 사용합니다.
본인은 Sartorius가 사용자 프로필을 생성하고 관심있는 관련 있는 광고를 제공하기 위해 본인과 관련된 데이터를 처리하는 데 동의합니다.
이 동의는 자발적이며 이 웹사이트를 사용하는데 필요하지 않으며 향후 언제든지 철회할 수 있습니다.
동의
거부